The CineGrey 3D® is an advanced angular reflective front projection screen material designed to combat ambient light while preserving excellent picture quality. It's an ideal solution for environments with limited control over incidental light, such as family rooms, lecture halls, boardrooms, sports bars and training facilities. The CineGrey 3D® maintains image clarity and contrast in various lighting conditions while increasing projector brightness by 1.2 times, which particularly benefits low-lumen output projectors. This versatility makes it suitable for both home and business environments. It outperforms traditional white or gray screens in maintaining sharp, bright images regardless of ambient light. The screen's technology incorporates a diffusion layer over a highly reflective surface. This design directs light from the projector straight into the viewer's field of vision, while an outer contrast layer absorbs indirect ambient light, enhancing overall image quality. 

Warranty 2-year manufacturer's warranty

Key Features and Benefits

Screen Material

• Angular Reflective CLR®/ALR Front Projection Material for Standard Long Throw Projectors. 
  • (NOT Compatible with Ultra/Short Throw Projectors)
    
  • 1.2 Gain Polarized 3D material
    
• ISF Certified for accurate color points, color temperature and dynamic range
  
• Contrast enhancement and superb color balance
  
• Ambient Light Rejecting – Counters wash-out effect from ambient light
  
• Active 3D, 4K Ultra HD, and HDR Ready
  
• Lower cost than higher end matte white or gray screen products
  
• Available in the following diagonal sizes: \n
  • 92", 100″,  106", 110″, 120″ in 16:9 format
    

Design and Installation

• Black velvet surfaced covered 2.36″ aluminum frame enhances overall appearance and absorbs projector light overshoot
  
• Easy to assemble and install in minutes
  
• Adjustable fix plates provide equal tension over the entire projection surface
  
• Sliding wall brackets allow screen to slide horizontally for properly centered installation.
  
• Installation kit includes: sliding wall brackets, drywall anchors, and screws

Installing the Elite Screens Sable Frame CineGrey 3D® Series Projector Screen

Notice to installers: Projector placement for angular-reflective screen

Please use the following installation instructions to obtain superior optical performance from the ALR (Ambient Light Rejecting) Screen

- Angular-Reflective material is not compatible with ultra/short-throw projectors \n- Minimum lens throw ratio 1.5x image width \n- Ambient light must not come from the same direction as the projector

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is important to position the projector so that the viewer will get the best possible image.

Step 1: Establish the general “eye level” of the viewers

Step 2: Set the appropriate projection level

Step 3: Adjust the screen height level and projection angle Input Angle (A) = Output Angle (B) aligns with the viewer’s angle