SVS PB 2000 SUBWOOFER

Featuring Ultra Series technology, the SVS PB-2000 subwoofer unleashes effortless, commanding bass down to 17 Hz with exceptional detail and musicality. Sets all the performance benchmarks for a powered home theater subwoofer under $1,000.

For chest-thumping movie slam and impact and sheer low frequency performance for the price, the PB-2000 subwoofer destroys larger and more expensive subwoofers, dipping all the way down to 17Hz without sacrificing musicality or speed in transients. The subwoofer features a front-firing 4-inch high-flow port with inner/outer port flares and energizes rooms of all sizes with extreme low frequency output for jaw-droppingly powerful and realistic movie and music audio experiences.

Commanding 12-Inch SVS High Output Driver

At the heart of the SVS PB-2000 ported box subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and FEA-optimized motor for nearly distortion-free performance. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the subwoofers to their maximum output levels. To ensure the PB-2000 can withstand punishing output levels long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximize longevity.

Powerful and Sophisticated Sledge STA-500D Amplifier

The PB-2000 Subwoofer’s Sledge STA-500D DSP amplifier features specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at a robust 500 watts RMS continuous and 1,100+ watts peak dynamic, the amplifier has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don’t stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behavior at the drive limits of the subwoofer system.

With cabinet dimensions of 20.9” x 17.3” x 22” and weighing 66 lbs, the PB-2000 is nearly 40% larger and twice the weight of the SB-2000.

Subwoofer Specs

• Premium black ash finish.
• Protective non-resonant steel mesh grille.
• Front-firing 12″ driver.
• Rear-mounted amplifier.
• Screw-in rubber feet.
• Robust Medium Density Fiberboard(MDF) cabinet construction.
• Cabinet Dimensions: 20.9″ (H) x 17.3″ (W) x 23.2″ (D) (without grille).
• Overall Dimensions: 20.9″ (H) x 17.3″ (W) x 25.4″ (D) (with grille).
• Weight (unboxed): 65.6 pounds.
• Shipped Dimensions: 30″ (H) x 23″ (W) x 27″ (D).
• Shipped Weight: 82 pounds.

Driver Specs

• SVS 12” 2000-series driver.
• Powder-coated cast aluminum basket.
• Dual high-grade ferrite magnets.
• Finite Element Analysis (FEA)-optimized motor structure.
• Dual shorting rings reduce gap induction and lower distortion.
• Extended pole piece improves heat sink and thermal management properties.
• 2” diameter, high-power voice coil.
• Upgraded Nomex spider for improved linearity and driver control at extreme drive levels.
• High-quality insulated tinsel leads with 3-point-contact precision alignment.
• Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behavior.
• Low-creep rubber long-throw surround for excellent durability and longevity.

Amplifier Specs

• Sledge STA-500D DSP amplifier.
• 500 watts RMS continuous (1100 watts peak dynamic).
• Efficient and cool-running Class D topology.
• DSP control for accurate response and refined behavior under all operating conditions.
• Main power rocker switch.
• Auto-On / On toggle switch.
• 3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input.
• Green standby mode with > 0.5 watts consumption.
• Stereo line-level RCA Input & Output connections.
• Input impedance – 47 kΩ (unbalanced line-level RCA).
• Continuously variable volume/gain control.
• Continuously variable (0-180 degrees) phase control.
• Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting.
• Fixed 80 Hz 12 dB/octave high pass filter on line level outputs.
• RoHS compliant, lead-free construction and world-wide safety certifications.
• Detachable power cord.