Emotiva XPA-9 Gen3 – 9 Channel Power Amplifier
Product Description
- The XPA-9 is a nine-channel audiophile quality power amplifier, and is perfect for powering all of your speakers in a 7.1.2 configuration or 5.1.4 configuration Dolby Atmos / DTS:X home theater system.
- Modular design – two to seven channels
- Proven and reliable Class AB output stages
- High current switch mode power supply
- Lighter weight than the competition
- Excellent audio quality
- Low noise, low distortion, wideband amplifier design
- Optimized Soft-Switch Class Hâ„¢ power supply topology.
| IN THE BOX | |
|---|---|
| Sales Package | Amplifier and User Documentation |
| General | |
|---|---|
| Brand | Emotiva |
| Model | XPA-9 Gen3 |
| Color | black |
| Specifications | |
|---|---|
|
Circuit Topology
|
The XPA-9 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class Hâ„¢ power supply topology, and microprocessor-controlled fault protection.
The XPA-9 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).
|
|
Audio Specifications
|
The XPA-9 Gen3 features five of our High-Powered Single Channel Modules and two of our Stereo Modules |
|
Audio Specifications (High-Powered Single Channel Modules)
|
Power Output:
300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.
THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load):
> 115 dB; ref FTC rated power; unbalanced input (A-weighted).
> 86 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel): 4 Ohms
(which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Damping Factor (8 Ohm load): > 500.
Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.
Gain: 29 dB.
Input Impedance:
33 kOhms (balanced).
23.5 kOhms (unbalanced).
|
|
Audio Specifications (Stereo Modules)
|
Power Output:
65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB.
THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load):
> 105 dB; ref FTC rated power; unbalanced input (A-weighted).
> 85 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel): 4 Ohms
(which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Damping Factor (8 Ohm load): > 500.
Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV).
Gain: 29 dB.
Input Impedance:
33 kOhms (balanced).
23.5 kOhms (unbalanced).
|
|
Input And Output Connections
Input Connections (High-Powered Single Channel Modules)
|
Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.
Input Connections (Stereo Modules):
2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.
Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.
Trigger:
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA.
|
| Power Requirements | Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected) |
|
Rear Panel Controls
|
AC Power switch: rocker switch (switches AC main power).
Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.
Input selector switches (one per channel):
metal toggle switches; select between balanced and unbalanced inputs.
Circuit Breaker: press button to reset circuit breaker
|
| Dimension | |
|---|---|
| Dimension |
17†wide x 8†high x 19†deep (unboxed; including feet)
17†wide x 7†high x 19†deep (unboxed; without feet)
24-1/2†wide x 12†high x 24-3/4†deep (boxed)
|
| Weight |
53 lbs (unboxed)
58 lbs (boxed)
|
| Warranty | |
|---|---|
| Warranty Type | Manufacturers |
| Warranty Period | 1 Years |
Reviews
There are no reviews yet.