Emotiva XPA-7 Gen3 – 7 Channel Power Amplifier
Product Description
- A 7 Channel Audiophile Home Theater Power Amplifier
- Perfect for powering the seven main bed channels of a 5.1 channel, 7.1 channel, or Dolby Atmos / DTS:X home theater system.
- Low noise, low distortion, wideband amplifier design.
- Optimized Soft-Switch Class Hâ„¢ power supply topology.
- Switched Mode Power Supply (SMPS) offers all of the performance of a traditional linear power supply, with improved efficiency and reliability, and reduced overall weight.
- Solid machined gold-plated RCA input connectors.
- Standard IEC power inlet fits all standard IEC power cables and most custom audiophile power cables.
- Remote trigger input and output allow the XPA-7 Gen3 to control and be controlled by other trigger-enabled equipment.
| IN THE BOX | |
|---|---|
| Sales Package | Amplifier and User Documentation |
| General | |
|---|---|
| Brand | Emotiva |
| Model | XPA-7 Gen3 |
| Color | black |
| Specifications | |
|---|---|
|
Power Output
|
300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven
550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven
490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven
200 watts RMS/channel; THD<0.1%; 8 Ohms; ALL SEVEN channels driven
|
|
Power Bandwidth (at rated power; 8 Ohm load)
|
20 Hz to 20 kHz (+ / – 0.1 dB)
|
|
Broad Band Frequency Response
|
5 Hz to 80 kHz +0/-2 dB |
|
THD + noise
|
< 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms |
|
Signal to Noise Ratio (8 Ohm load)
|
> 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted) |
|
Minimum Recommended Load Impedance (per channel)
|
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads |
|
Damping Factor (8 Ohm load)
|
> 500
|
|
Input Sensitivity (for rated power; 8 Ohm load)
|
1.5 V |
|
Gain
|
29 dB |
|
Input Impedance
|
33 kOhms (balanced)
23.5 kOhms (unbalanced)
|
|
Input Connections (High-Powered Single Channel Modules)
|
Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable
|
|
Input Connections (Stereo Modules)
|
2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable |
|
Speaker Output Connections
|
Audiophile grade, gold plated, 5-way binding posts |
|
Trigger
|
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 120 mA.
|
|
Standby
|
push button (halo ring changes color to indicate Standby or On) |
|
Status LEDs
|
one per channel; blue. Status LEDs change to red to indicate a fault condition |
|
Protection
|
The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. |
| Dimension | |
|---|---|
| Dimension |
17†wide x 8†high x 19†deep (unboxed; including feet)
17†wide x 7†high x 19†deep (unboxed; without feet)
24-1/2†wide x 12†high x 24-3/4†deep (boxed)
|
| Weight |
53 lbs (unboxed)
58 lbs (boxed)
|
| Warranty | |
|---|---|
| Warranty Type | Manufacturers |
| Warranty Period | 1 Years |
Reviews
There are no reviews yet.