Description
JBL Studio 6 66LCR – 2 Way Dual 6.5 inches In-Wall Speaker (Each)
Studio 66LCR
Dual 6.5″ (165mm) 2-way In-Wall Loudspeaker
With dual 6.5″ (165mm) Polyplas® woofers and a 1″ (25mm) Compression Driver with High-Definition Imaging (HDI™) waveguide the Studio 66LCR is perfect for front channels in any home theater. The Dog Leg mounting system allows for easy installation and the zero bezel grilles make the 66LCR visually discrete so they blend into the walls seamlessly.
1″ (25mm) Compression Driver with High-Definition Imaging (HDI™) waveguide
Dual 6.5″ (165mm) Polyplas® woofer
High frequency level adjustment and Low Frequency boundary compensation
FEATURES
- Premium air-core inductors and mylar capacitor crossover network components
- Dog Leg installation system for quick and easy installation
- Zero bezel metal grille installs flush to wall or ceiling for a clean, inconspicuous appearance
Dual 6.5″ (165mm) 2-way In-Wall Loudspeake
With dual 6.5″ (165mm) Polyplas® woofers and a 1″ (25mm) Compression Driver with High-Definition Imaging (HDI™) waveguide the Studio 66LCR is perfect for front channels in any home theater. The Dog Leg mounting system allows for easy installation and the zero bezel grilles make the 66LCR visually discrete so they blend into the walls seamlessly.
Specifications
|
High Frequency Transducer
|
1″ (25mm) Compression Driver with High-Definition Imaging (HDI™) waveguide |
|---|---|
|
Low Frequency Transducer
|
Dual 6.5″ (165mm) Polyplas® woofer |
|
Nominal Impedance
|
6-Ohm |
|
Sensitivity (2.83V@1m)
|
91dB |
|
Power Handling
|
50W RMS (200W Dynamic) |
|
Recommended Amplifier Power
|
50 – 70W |
|
Frequency Response
|
45Hz – 20kHz |
|
Crossover Frequency
|
2.5kHz |
|
Grille Dimensions (HxW)
|
8.2″ x 18.6″ (209mm x 473mm) |
|
Cutout Dimensions (HxW)
|
7″ x 17.4″ (180mm x 443mm) |
|
Mounting Depth
|
3.74in (95mm) |
Reviews
There are no reviews yet.